Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

how to calculate this EIRP? and some related questions?

Status
Not open for further replies.

semiconductor

Full Member level 4
Joined
Apr 4, 2003
Messages
236
Helped
4
Reputation
8
Reaction score
0
Trophy points
1,296
Activity points
2,735
Question 1a
Find the EIRP needed for a LOS FM station knowing the following parameters:
G/T at the the receiver is 12dB, data rate is 512 Kbps, distance between Tx and Rx is 30km. working frequency is 9GHz, and C/N ≥ 12dB

Question 1b
Find the EIRP needed for an Earth Station (ES) knowing the following parameters:
G/T of the Satelite Station (SS) is 12dB, Bandwidth is 24MHz. working frequency is 4GHz, and C/N ≥ 12dB (it would be a GeoStationary SS)

Question 1c
Find the value of the parameter G/T of a GeoStationary Satelite Station (GSSS) knowing the following parameters, EIRP of Earth Station (ES) is 17dB, data rate is 64Kbps, S/N ≥ 12dB and working frequency is 14.1 Ghz

Question 2:
What is the relationship between the B (bandwidth of channel) and R (data rate). I mean, if they give us the parameter R, how can you find B?

Question 3:
If we know the type of modulation, can we find the bandwidth needed to transmit the data. e.g. QPSK --> B = 64K --> this is right or wrong?


Thank you in advance!
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top