Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

how to increase the gain of the microstrip patch antenna array in ADS

Status
Not open for further replies.
H

harinivas

Junior Member level 2
Joined
Oct 4, 2012
Messages
20
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,389
hi i ve designed 4X4 microstrip patch array antenna at 35GHZ using ADS
the parameters i m getting are
returnloss =-25.86
directivity is 18.56 dbi
gain= 11.23dbi
gain is very low

so i want to ask that what is the range of the gain and how can i increase the gain my antenna
plz guide me
 

Its a 4x4 microstrip patch array?

The gain and directivity sound decent then... what is the individual element gain?
 
Last edited:

harinivas said:
4X4 microstrip patch array
directivity is 18.56 dbi
gain= 11.23dbi
Click to expand...

The directivity seems ok: for a single patch, you can expect ~6 dBi. When doubling the number of elements, the directivity increases by 3dB. For 16 antennas, you can expect 6 dBi + 4*3dB = 18dBi directivity. That agrees with your simulation results.

The difference between directivity and gain is the loss in your antenna. At some point, when you add more elements, the additional loss in the distribution network is eating up all the extra gain.

Have you tried to simulate the insertion loss of your distribution (feed) network, so that you know the loss between the common input and the 16 antenna inputs?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top