Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

MCU to MCU connection

Status
Not open for further replies.
OunaLypse

OunaLypse

Member level 2
Joined
May 21, 2012
Messages
50
Helped
5
Reputation
10
Reaction score
5
Trophy points
1,298
Location
Bushbuckridge, Mpumalanga, South Africa
Activity points
1,519
Hi.

I mistakenly connected wrong pins on a ckt that had more than two MCU the pins were both outputs.
that did not damage the MCU's but it caused an unexpected delay or the MCU work on a very low speed.

do I have to replece the MCU or reprogram it?
 

Can you elaborate on the "unexpected delay"? How did you deduce that the microcontroller works at a low speed?

It wouldn't hurt to reprogram the microcontroller and see what happens.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top