Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Micro-Controller AT89 series copier

Status
Not open for further replies.
Y

your1click

Member level 3
Joined
Oct 23, 2012
Messages
65
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
Dubai, United Arab Emirates, United Arab Emirates
Activity points
1,689
I have a one electronics ckt which have a one micro-controller At89C2051 but i got that IC damages so i want to replace it but i don't have that ic but i have similar devices so i want to copy the ic... so have you any idea about the copy the ic any circuit? please help me..
 

can you read the 89C2051 with another programmer or is it damaged?
if you explain what programmer it is or where you got it maybe someone has the software for it?

Can you post a schematic of the programmer?
 
i have a physio therapy unit TENS, I have a to device. one is damage and another is ok. and when i replace the damage ic into fine device, the device stopped to work. so im conform that 89c2051 is damage. so i want to copy fresh 89c2051 to another blank IC.
 

This is by far the best and easiest & most reliable programmer for the at89C2051.


**broken link removed**


follow the schematic carefully and you will have a good programmer.
If your PC does not have a serial port, you can use a good USBtoRS232 cable (not a cheap knock-off from China!).
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top