Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

how to Convert a 38 pin connector

Status
Not open for further replies.
R

rocky88191

Newbie level 1
Joined
Sep 26, 2012
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,287
Hi,

I need to read values from certain pins (pin no 9, 10, 11) from the CPM connector (Please refer the attachment or use the URL). In the PC end I can use putty or RealTerm. But how do I reduce the no of pins that is coming from the CPM connector so that I can use RS-232 while connecting it to the PC.

https://obrazki.elektroda.pl/6886563600_1348698978.png
 

Only crimp the flat cable wires that you need into a 38-way IDC connector and cut the rest of the conductors away.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top