Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Toroid Ferrite - Ferroxcube

Status
Not open for further replies.
A

AMSA84

Advanced Member level 2
Joined
Aug 24, 2010
Messages
577
Helped
8
Reputation
16
Reaction score
8
Trophy points
1,298
Location
Iberian Peninsula
Activity points
6,178
Hi there guys.

I have searched in the forum and google but I didn't find anything about this:

I'd like to know if I can use this toroid FERROXCUBE - TN29/19/15-3E25 - FERRITE as a HF transformer?

Regards.
 

What are you particularly searching at the forum? Why don't you consider the Ferroxcube Soft Ferrite Databook as your first information source? You'll find e.g. pulse/general purpose transformers as one of the suggested 3E25 applications. For detail questions, you'll want to refer to the material data.
 

Hi AMSA84
What do you mean by HF ?
HF will start from an special range up to an special range of frequency . are you trying to make an HF transmitter or just SMPS ?
Best Wishes
Goldsmith
 

3E25 is high permeability core, ui at 25 degree is 6000,, it is application: EMI filter, current compensated,choke.
You can use the toroidal to make HF transformer, please note: Bsat is about 390mT at 25 degree and 1200A/m.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top