Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

error in the simulator of MIG project

Status
Not open for further replies.
N

naira

Newbie level 3
Joined
Jul 13, 2012
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,305
hello everybody...
while i generated the MIG core and do all steps to check the DDR as mentioned { UG818 (v 13.1) } of
ISim Hardware Co-Simulation Tutorial:
Interacting with Spartan-6 Memory Controller and On-Board DDR2 Memory

and reached page 21 : Run the Simulate Behavioral Model process for the mig_hw_tb instance.
but during this point i fall in an error in the simulator :
Access is denied: "isim\mig_hw_tb_isim_beh.exe.sim\unisim"

so what can i do ? any body help me please.

thanks in advance
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top