Looking for ISO 7816 card footprint

iso 7816 card foot print

i want 2 draw a smart card with iso7816 contacts pin to my pcb
i can't find a libarary has that footprint
any one have a libarary or drawing file has that footprint

i try also 2 draw it as i have a datasheet at OrC*D 10 but i didn't know how 2 place a contact plats without a hole

for more information about iso 7816 see txt file
2.2 - ISO7816-2 Standard
~~~~~~~~~~~~~~~~~~
2.2.1) Minimal Contact Size :

,-------------, ^
| | |
| | | 1.7mm
| | |
'-------------' v
:<----------->:
2mm


2.2.2) Pin's position :


,-----------------------------------------------------------------
| : :
| : C
| D :
| : ---- ,----, ,----,
| : | C8 | | C4 | -,
| ------- '----' '----' |
| ,----, ,----, |
| | C7 | | C3 | |
| '----' '----' |
| ,----, ,----, | AFNOR position
| | C6 | | C2 | |
| '----' '----' |
| ,----, ,----, |
| | C5 | | C1 | -'
| '----' '----'
| ,----, ,----,
| | C1 | | C5 | -,
| '----' '----' |
| ,----, ,----, |
| | C2 | | C6 | |
| '----' '----' | ISO7816 position
| ,----, ,----, |
| | C3 | | C7 | |
| '----' '----' |
| ,----, ,----, |
| | C4 | | C8 | -'
| '----' '----'
| : :
| A : :
|<------------------------------>: :
| :
| B :
|<----------------------------------->:
|


2.2.3) Pin Assignement: C1 : Vcc = 5V C5 : Gnd
--------------- C2 : Reset C6 : Vpp
C3 : Clock C7 : I/O
C4 : RFU C8 : RFU


2.2.4) Contact Location:
-----------------

All the sizes are in milimeters

| A B C D | A B C D
----+------------------------------- ----+-------------------------------
C1 | 10.25 12.25 19.23 20.93 C1 | 17.87 19.87 16.69 18.39
C2 | 10.25 12.25 21.77 23.47 C2 | 17.87 19.87 14.15 15.85
C3 | 10.25 12.25 24.31 26.01 C3 | 17.87 19.87 11.61 13.31
C4 | 10.25 12.25 26.85 28.55 C4 | 17.87 19.87 9.07 10.77
C5 | 17.87 19.87 19.23 20.93 C5 | 10.25 12.25 16.69 18.39
C6 | 17.87 19.87 21.77 23.47 C6 | 10.25 12.25 14.15 15.85
C7 | 17.87 19.87 24.31 26.01 C7 | 10.25 12.25 11.61 13.31
C8 | 17.87 19.87 28.85 28.55 C8 | 10.25 12.25 9.07 10.77
----+------------------------------- ----+-------------------------------
ISO7816 location AFNOR location


NB: The AFNOR location is transitional, and has been used for compatibility
reasons with existing magnetic stripe cards.

Re: iso 7816 card foot print

I don't know OrCAD, but you've to use a connector for the smart card. So you can't just draw the layout of the smart cards terminals according ISO7816 on your PCB.


Mik