Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to display the terminals in the layout?

Status
Not open for further replies.
G

gulu2065

Newbie level 3
Joined
Jul 7, 2012
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,309
When create Pins in the do the layout in virtuoso layout, I forget to set the "Display Terminal Name".
Now after I finish the layout, is there anyway I can choose to display the terminal name?
I cannot see the terminal name anyway!
Thanks,
Qingbo
 

Without having currently access to Virtuoso, I just remember the following -- don't know if it really works like this:

1. Select all these terminals
2. Hit "q" (query)
3. Change the "only current" field into "all selected"
4. Click "Display Pin Name" to display pin names.
 
erikl,
Thanks for your help!
However, it is a big layout and there are 10s terminals.
Someone else do the previous work. It's hard for me to find the position of all the terminals. Is there any way to change this without select all the terminals or if there is a way to easily select all the terminals without clicking on each one?
Thanks,
 

If I remember well, in the LSW you can limit the object selectability to terminals only.

Or by skill commands (enter into the CIW):
Code: 
leSetAllObjectsSelectable( nil [I]myTechFile[/I] ) # nothing selectable ; [I]myTechFile[/I] is your technology file
leSetPinSelectable( t [I]myTechFile[/I] )          # make pins (terminals) selectable

Then select all: "Ctrl<Key>a" or "geSelectAllFig()"
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top