Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Help required in converstion from concentration to mole fraction

Status
Not open for further replies.

msharmavikram

Junior Member level 3
Joined
Jul 13, 2012
Messages
29
Helped
9
Reputation
18
Reaction score
6
Trophy points
1,283
Location
Bangalore
Activity points
1,428
hello everyone,
I dont have very good chemistry back ground since i have left it 3years ago. I want to know the relation btw concentration and mole fraction. Allow me to explain the problem.

Consider that you are given a one cubic big box consisting of Nitrogen gas in it initially. It is required to make the box contain a mixture of Nitrogen and Oxygen with the mole fraction of 0.3. Now the question is what is the concentration(cm-2/m-2) of Oxygen which has to be applied or feed to the box to create that mole fraction?

Thank you.
 

Doesn't 1 mole of gas have a specific volume at a specific temperature? I think it does. Assuming I'm correct, you will need 0.7 cm2 of Nitrogen and 0.3 cm2 of Oxygen.

In other words, Oxygen's concentration in volume needs to be 0.3 cm2/cm2.

I'll leave the unit conversion to you.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top