Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

V-scoring in Orcad layout? How?

Status
Not open for further replies.

farhada

Advanced Member level 2
Joined
Oct 1, 2004
Messages
587
Helped
84
Reputation
168
Reaction score
30
Trophy points
1,308
Location
Nice, France
Activity points
5,025
v-scoring in layout

Hi,
I am new in OrCad and wonder if anyone know how to do V-Scoring so I can have multiple designs on a same file for prototype manufacturing?

I have found a lot of info about the subject using google, but nothing about HOW to actually do it?!

Really appreciate your help,

Best regards,
/Farhad
 

orcad layout v groove

Scoring and other special fabrication instructions are done as notes on your drill drawing, a mechanical layer, and/or a separate fabrication instruction sheet - depending on what your fab is accustomed to seeing. The notes are instructions to your PCB fab concerning exactly what you want to do.

You put your scoring lines on a mechanical Gerber layer. The PCB fab then uses the lines and your notes to make the scoring after the panel has been fabricated. The scoring is done with a router bit.

You should contact your fab and find out how they prefer to receive their instructions.
 

    farhada

    Points: 2
    Helpful Answer Positive Rating
orcad layout fab

i give two holes for the straight line and inform the PCB manufacturer that a V groove is required.

There are seperate machines for V grooving.
 

    farhada

    Points: 2
    Helpful Answer Positive Rating
pcb v-groove fab drawing

Thank you all.
I will try it out to see how it works in my current project. Hopefully I can save a few bucks doing so.

BR,
/Farhad
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top