Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Power Line Communication Circuit - To run Digital Clock

Status
Not open for further replies.

eetech

Newbie level 3
Joined
Aug 20, 2009
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,306
Hi,

I am in search of low cost Powerline communication circuit/modem through which i would like to transfer Time information(RTC) including seconds from a master clock to many receiver within a building! So it would be around totally 8 bytes of information including other miscellaneous alerts every second.
Also it is better if the circuit or modem supports 3 Phase.

Any idea which IC/Ready Modem will capable of performing above requirement?

Going through TDA5051, but still not sure whether it would transfer my required data within required time erroneously.
And what is the range of transmission using TDA5051? Anyone tried successfully??

Transmission of Data should be very precise since target is to transfer Real Time Clock with seconds.
All your help and inputs are greatly welcome.
Thanks.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top