Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

QRC and post simulation problem: undefined model

Status
Not open for further replies.
N

ning_jing

Newbie level 5
Joined
Apr 30, 2012
Messages
9
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,343
hello
I have a question about QRC and post simulation. Before performing post simulation I run QRC to get the av_extracted view of my circuit.
When i try to perform the post simulation, I get the error:
1.PNG

The netlist :
2.PNG

All model files are added into the model library. Actually cmodel is not in my model file. The correct model name of these instances should be capacitor, resistor...
I am really confused. does anybody can help me?
 

could you try to replace the model name in the netlist with the correct model name ? I have seen this happen before in the translation that the netlist generator selectes a different name than the model file.

As a test just pick the 'cmodel' and replace it with 'capacitor'
 

thanks for your reply.
But it is very difficult to replay the model names manually. Because the netlist has many strange names like poly1 met1 met2......which are undefined model in my model file......
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top