Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

ESD testing on multiple power pins

Status
Not open for further replies.
S

skowe26

Member level 1
Joined
Sep 23, 2008
Messages
34
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
1,424
Hi,

For ICs having multiple power pins (say 1 analog and 1 power ground), how is the ESD setup for "pin to gnd" test? Do they need to test it separately or Agnd & Pgnd need to be shorted in the test?

Thanks!
 

For handling ESD, "any to any". For an in-system ESD (like
connector / harness to chassis) test it like you'd field it.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top