Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Unsolicited Result Codes during modem data transfer

Status
Not open for further replies.

mmitton

Newbie
Joined
May 24, 2012
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
South Africa
Activity points
1,353
Hi,

We are using a PIC18F67J11 connected to a cinterion MC55i. We currently use the modem to make numerous HTTP requests and FTP for uploading data and downloading settings and new firmware. We now need to integrate voice into the application and have the following problem;

Unsolicted Result Codes (URC) sent from the modem (such as from an incoming voice call) can present themselves at any time during comms with the modem. This is obviously bad for us as it corrupts the data.

The following link https://embeddedfreak.wordpress.com...-unsolicited-result-code-in-hayes-at-command/ gives recommendations to make sure that you get a response to your AT command before the URC is sent from the modem, but what if the modem sends the URC while reading/writing a block of data to the modem? How is this handled in a real world application with simulatneous voice/data?

Regards
Mark
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top