Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Convert from PECL to Sine wave.

Status
Not open for further replies.
M

Mustahsin

Newbie level 4
Joined
Apr 20, 2012
Messages
7
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,335
Can I convert my PECL signal coming out from a VCXO to a Sine wave? The frequency should be around 80-100 MHz.

I want to use Toyocom TCO−2111T 122.88-MHz PECL VCXO along with CDC7005 by TI and my ADC is ADS6149 by TI

Any suggestion?

Sincerely,
Mustahsin
 

Not sure why you'd want to convert a sharp PECL signal to a sine-wave?
If you do, just use a low-pass filter.
 
sky_123 said:
Not sure why you'd want to convert a sharp PECL signal to a sine-wave?
If you do, just use a low-pass filter.
Click to expand...

I will need that Sine wave to run a LASER Driver. This LASER Driver and ADC have to be synchronized. So, I would prefer to use the same source.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top