[Moved]install WINCE on ARM(general question abaut create ARM board and install WIN)

Hi every body,
I am to create an ARM board with features below:
1. ARM micro-controller (which support WINCE => probably ARM9 or ARM11)
2. A touch LCD
3. 2 sign LED
4. 4*4 keypad
5. USB (for installing WINCE on ARM => maybe another connector be used )
Do I need something else to do this?

It is clear that I'm newbie in ARM,so I don't want use C or Assembly nor another programming language.(I should say that I have to install a WINCE on ARM).
On the other hand, I don't want use Prepared ARM Board (I want make it by my own).

The goal is: create ARM board and install WINCE on ARM
And
The questions are:
A) I want to design that board with Altium Designer, but I don't know any thing about board design in high frequency (ARM frequency is around 2 GHz)
B) Is there any driver for touch LCD and keypad?

I was wondering if you help me.
thanks a lot

Could you please take some Learning subject here?
thanks

well, or you need to learn some advanced C or ASM programming, or use a pre-designed arm board (don't necesarly to use an actual arm board but copy it's basic design, especially for IO devices and ports)

i have seen a little of wince in a mini2440 board.
this is a good reference to generate a wince image for that board.

of course it takes into account the specific hardware of the mini2440 in the BSP (Board Support Package) which you will need to generate for your specific custom-made board... here is some info about it, sadly i couldn't find something useful to generate them in my quick google search.... maybe if you make a deeper search...

good luck with your design, sadly i can't help anymore as this is beyond what i've done or seen...