Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Ultrasonic Level Measurement

Status
Not open for further replies.
M

masoud1234

Junior Member level 2
Joined
Jan 12, 2011
Messages
20
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,394
hi
Iwant measured water level inside tank by the Ultrasonic module
The tank height is 8 meters
please help me,
 

Define your user stories in terms of accuracy, temperature range, water surface details , update rate, output resolution and format
Then search Google and EDA for ultra sonic distance
 

thanks , For example SRF08 module ,Can this module be used to measure the water level؟؟؟
 

The maximum range is 6 meters (your specification is 8 meters) and I do not think that without a suitable enclosure that the sensor will survive the humidity in the tank. The interface is I2C. The microprocessor must have an I2C capability (preferable HW). There is no internal temperature compensation
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top