Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

I need to send the data to PC from my MCU via USATR.

Status
Not open for further replies.
PA3040

PA3040

Advanced Member level 3
Joined
Aug 1, 2011
Messages
883
Helped
43
Reputation
88
Reaction score
43
Trophy points
1,308
Activity points
6,936
Dear all,
I need to send the data to PC from my MCU via USATR. I did it using MAX232 Protocol
So my request is the data received to PC,I need to store in the Database or Spreadsheet
currently the data received to Hyper terminal
Is there any software better than Hyper terminal which easy to capture data and store in the Database
My MCU is 16f877a
Please help
Thanks in advance
 

Use comport toolkit or the terminal function available on flash magic

---------- Post added at 13:40 ---------- Previous post was at 13:18 ----------

For DATA LOGGING - as you said storing data , you need to write program in VB or C that opens a file writes to it and then stores the content !!!
 
  • Like
Reactions: PA3040

    PA3040

    PA3040

    Points: 2
    Helpful Answer Positive Rating
Dear All
Thanks for reply
As I know in Asynchronous transmission mode the clock rates not sync both Tx and Rx side which is independent clocks rate.
Let suppose, we need to communicate between two devices with different clock rates or maximum clock rate
Please advice me how can we implements such situation using MCU like pic 16f877a
please advice
Thanks in advance
 

hello,

Maybe you can use Hardware UART for one and Software UART for the other !
 

Hi,


You can also look at https://www.docklight.de/
For more specific data types, i guess you will need to write your own program on PC.
I suggest to use Visual Studio Express.
The Serial Port port useage is quite simple.
 

PA3040 said:
Is there any software better than Hyper terminal
Click to expand...


Hi,

Find that Putty is much more friendly, reliable and versatile than hyper terminal.
https://www.chiark.greenend.org.uk/~sgtatham/putty/

Don't forget you can connect your serial rs232 cable to one of the cheap ebay " Serial RS232 DB9 to USB Adapters" and take the data in via a USB port.

I am also in need of a PC program to take the data into a database etc, if you find or write one would appreciate a link to it.
 

PA3040 said:
Let suppose, we need to communicate between two devices with different clock rates or maximum clock rate
Click to expand...
If two MCUs are to communicate with each other via UART, or an MCU with PC via RS232, baudrates must be synchronized.
In your situation it seems that there is no problem, set the same baudrate on both devices. Except if it is something else that you need that I did not got it clearly.


PA3040 said:
Is there any software better than Hyper terminal which easy to capture data and store in the Database
Click to expand...
Here is an edaboard thread on this that could be proved helpful:
https://www.edaboard.com/threads/228501/


Alexandros
 

hello


if you send your data (ascii format) to a "hyper terminal" witch has the capacity of logging all data in a file,
you can use Comma Separated Value CSV (excel) format .. and then export as Database with excel or directly use excel as simple database.

An other way is to use DBF format (old but simple to use) to build a file data.
 
  • Like
Reactions: PA3040

    PA3040

    PA3040

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top