Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

i m facing a problem in my project where i have decided to use at89s52

Status
Not open for further replies.
S

sharma46

Newbie level 6
Joined
Mar 20, 2012
Messages
14
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,283
Activity points
1,384
wt is the header file used for controller at89s52? wt is the way to define a bit in at89s52? can i use flash magic burner to burn the hex program of at89s52?
 

you can use
#include<reg51.h> or
#include <REGX52.h>
yes you can programmed the controller Flash Magic burner
 
aameer said:
you can use
#include<reg51.h> or
#include <REGX52.h>
yes you can programmed the controller Flash Magic burner
Click to expand...

can you tell me how to adress a pin of at89s52 is it the same method we use in microcontroller
like sbit en p2^3
or
bit pinb p0.2
 

Everything is same only your Controller changes.. Do Programming as you did for AT89s51/AT89C51...
IF you are using Keil u Vision...

All the Best
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top