Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Electric vehicle model (tractor)

Status
Not open for further replies.

Vermes

Advanced Member level 4
Joined
Aug 2, 2011
Messages
1,163
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,316
Activity points
22,318


Specifications:
  • speed: 0,6 m/s
  • weight: no more than 0,5kg with remote control and batteries
  • dimensions: length 25cm, width 10cm, height 11,5cm
  • driver ratio: 60:1
  • steering ratio: 180:1

Power:
  • main engine: 6V
  • turning engine: 3V
  • lights and electronics: 4,5V

It moves forward, backward, turns left and right.
Diameter of wheels: front 3cm, rear 6cm.

Description of construction:
The frame of the vehicle was made of three parquet strips and the chassis of cardboard. Reflectors were made of plastic ends of strings from a jacket. Wiper is a clock hand. Wheels and two electric motors were taken from old toy cars. You can turn on the front and rear lights (LEDs) and turn signals (springs from pens are used as contacts). Two-transistor electronic circuit is responsible for flashing. The remote control housing is bottom part of the old multimeter housing. Cable that connects the vehicle with the remote control is made of two cables from the broken mouse and keyboard.

Pictures:







And videos:


Link to original thread (useful attachment) – Elektryczny model pojazdu: Łunochód (traktor)
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top