Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
hii all
i did every think to get my desired output (12V) but i couldn't i hv tried changed MOSFET and rectifier diode many times but i still didnt get my output...where is the wrong here???
Check some of your component values to make sure that you are indeed using the correct values.
For example, you have C3=0.01F, most spice simulators will interpret this is 0.01 femto, where fempo is \[10^{-15}\], so in your case you might have a capacitor that is \[10^{-17}\] Farads. Also your inductor value for L7=1pH, this is \[10^{-12}\] Henries. Double check these values.
hii all
i did every think to get my desired output (12V) but i couldn't i hv tried changed MOSFET and rectifier diode many times but i still didnt get my output...where is the wrong here???
I don't see a polarity marking at the transformer. The waveform suggests forward instead of the intended flyback operation. But you'll see when monitoring the secondary voltage.
thnx ch wazir ya it helped, seeing my desired output for the first is sumthin great..lol..thanx aloot man.. but actually i still ddnt got my waveforms...dont know why??!!!
iam using multisim dear vamsi57
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
