Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Desin of Inverted F Antenna

Status
Not open for further replies.
S

shahbaz_asif

Newbie level 2
Joined
Jan 19, 2012
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Ilmenau , Germany
Activity points
1,295
Hello Every Body,
I am student of Microwave engineering and want to design Inverted F antenna for 900 MHz, 1800 Mhz and 2.45GHz so i will have 3 arms .one for 900 MHz,2nd arm for 1800 MHz and 3rd arm for 2.45 Ghz ,

My Question is How to select the port location in order to balance inductance and capacitance?

What formula should i use to calculate inductance and capacitance of my arm?

Thanks Alot

Muhammad Shahbaz Asif
 

Salaam Asif

You will find many a articles about Inverted F antennas,but there's one thesis i will recommend you reading and i can give you some PIFA files simulated with HFSS.

so the thesis is by a student from university of queensland.If you need PIFA files let me know.

Hope this helps

Regards
ChachitoEL
 

Attachments

  • PIFA thesis.pdf
    7.4 MB · Views: 338
Salam bro,

I am also working on design of Inverted F antenna for 2.45GHz .I have to use ADS as simulation software...Can you help in this regard...


Regards,

Wasim
 

i can help you with the design,But not very familiar with ADS.anyhow send an email i will give you my personal mail to correspond in the future.

Regards
Elchiquito
 
AOA Wasim, i m not familiar with ADS as i use to work on CST but send me ur email so that i should forward u links,by the way this link is very very informative, i designed my IFA that is working at 2.45GHz, 900 MHz and 1800MHz by getting help from this website and please watch video regarding IFA

Antennas: The Inverted-F Antenna (IFA)

***** HAFIZ ,




elchiquito said:
i can help you with the design,But not very familiar with ADS.anyhow send an email i will give you my personal mail to correspond in the future.

Regards
Elchiquito
Click to expand...


---------- Post added at 20:29 ---------- Previous post was at 20:28 ----------

AOA Wasim, i m not familiar with ADS as i use to work on CST but send me ur email so that i should forward u links,by the way this link is very very informative, i designed my IFA that is working at 2.45GHz, 900 MHz and 1800MHz by getting help from this website and please watch video regarding IFA
Antennas: The Inverted-F Antenna (IFA)

Antennas: The Inverted-F Antenna (IFA)

***** HAFIZ ,
 

Hi elchiquito,

may I ask your PIFA files simulated with HFSS?
I need it as example for my project..
the thesis help a lot too, thank you.

thanks
 

Hi,

I am working on a tunable/reconfigurable PIFA at 2GHz and 2.45GHz using CST Microwave Studio software. Is there anybody here that can help me with files or thesis related to this antenna design? As for now, I am having some difficulties in making the reflection coefficient falls below -10dB at the desired frequencies.
 

sofiyana90 said:
Hi,

I am working on a tunable/reconfigurable PIFA at 2GHz and 2.45GHz using CST Microwave Studio software. Is there anybody here that can help me with files or thesis related to this antenna design? As for now, I am having some difficulties in making the reflection coefficient falls below -10dB at the desired frequencies.
Click to expand...

Hi sofyana,

I'm having the same problems simulating PIFA in CST, I'm using the 900MHz example in the thesis attached above, but the S11 won't fall below -5dB even though I'm using the exact dimensions.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top