Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

USBasp AVR microcontrollers programmer

Status
Not open for further replies.
V

Vermes

Advanced Member level 4
Joined
Aug 2, 2011
Messages
1,163
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,316
Activity points
22,318


Nowadays, most computers are not equipped with RS232 or LPT port. That is why this programmer was designed. The project was taken from: LINK and modified a little. The board was re-designed.
Programs that can support the programmer:
  • mkAVR Calculator
  • eXteme Burner – AVR and other programs (avrdude)
Those programs were installed to the support of the programmer and they work properly, what means they read the program and fusebits from Atmega.



Few pictures of the programmer. In self programmer mode, stk200 programmer was used, shown on one of the pictures.



The board was made in Eagle based on the modified schema.



Link to original thread (useful attachment) – USBasp programator mikrokontrolerow AVR
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top