Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

problem in dc motor controller in the robot

Status
Not open for further replies.
H

hossam abdo

Full Member level 2
Joined
Mar 13, 2011
Messages
122
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,298
Location
Alexandria, Egypt, Egypt
Activity points
2,064
i made a robot
and the dc motor driver
dc motor controller.JPG
the problem is , when i run only one motor , it operates correctly but when i run the two motors
the problem occurs and the two motors didn't operate.
i think the problem in the current.
is i right? and what is the solve?

thanks in advance
 

How are the drivers connected to power supply.
(Show picture and voltages)

KAK
 

power suply features? max power? max current?
What motor you used?
How control your logic to inputs? Second motor not working at al....or? ..... to few parametres to help you!
 

If you are using normal AA batteries go for higher current version batteris eg: LITHIUM or any other.
Else use an REGULATED POWER SUPPLY for test purpose. It might solve your doubt on CURRENT rating issues...

GOODLUCK:)
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top