Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

couper problem please solve it

Status
Not open for further replies.
S

sagiraju123

Member level 3
Joined
Dec 10, 2009
Messages
64
Helped
4
Reputation
8
Reaction score
4
Trophy points
1,288
Location
Hyderabad
Activity points
1,644
hi every body i was using pads 2005(MENTOR GRAPHICS) i designed a 4layer pcb in it the problem iwas drawn a coupper pour in some area but the coupper pour was not coming in that place you can see the picture which i was attached above.but the cupper pour is coming in 2and 3layers but it was not coming in 1 and 4 layers so please solve my problem
 

Attachments

  • LAYER1.JPG
    LAYER1.JPG
    363.4 KB · Views: 99
  • LAYER2.JPG
    LAYER2.JPG
    321.3 KB · Views: 86
  • LAYER3.JPG
    LAYER3.JPG
    319.8 KB · Views: 79
  • Layer4.JPG
    Layer4.JPG
    340 KB · Views: 76

hi every body thank you for all those who view my post i solved my problem in 3layers but in layer2 again i was facing the same problem please any one help me for refernce please go through the attached file
 

Attachments

  • LAYER2.JPG
    LAYER2.JPG
    306.3 KB · Views: 81

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top