Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

level shifter to convert 5V TTL to 3.3V TTL chip

Status
Not open for further replies.
B

bianchi77

Advanced Member level 4
Joined
Jun 11, 2009
Messages
1,313
Helped
21
Reputation
44
Reaction score
20
Trophy points
1,318
Location
California
Activity points
9,442
Hello there,

Do you guys know what chip for converting 5V TTL to 3.3V TTL ?

Thanks
 

You can use the 74AHC series (74AHC245) to interface the different voltages.
The AHC series can tolerate an input of 5v with a power supply of 3.3v so it can take 5v as input and output 3.3v
http://ics.nxp.com/products/ahc/datasheet/74ahc245.74ahct245.pdf

The 74LVC series can be also used, it can also tolerate a 5v input with 3.3 power supply.


Alex
 

alexan_e said:
You can use the 74AHC series (74AHC245) to interface the different voltages.
The AHC series can tolerate an input of 5v with a power supply of 3.3v so it can take 5v as input and output 3.3v
http://ics.nxp.com/products/ahc/datasheet/74ahc245.74ahct245.pdf

The 74LVC series can be also used, it can also tolerate a 5v input with 3.3 power supply.






Alex
Click to expand...

Thanks a lot Alex,
my input are from 89C55WD 5V and I want to drive TFT LCD which needs 3.3V, is it possible ?

---------- Post added at 11:51 ---------- Previous post was at 11:37 ----------
You can use the 74AHC series (74AHC245) to interface the different voltages.
The AHC series can tolerate an input of 5v with a power supply of 3.3v so it can take 5v as input and output 3.3v
http://ics.nxp.com/products/ahc/data....74ahct245.pdf
Click to expand...

so I give 3.3V power supply to 74AHC245 and put the input 5V from 89S52 ?
Thanks
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top