Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Mitsubishi PLC FX-3u Programming cable diagram

Status
Not open for further replies.
E

engineerpervez1

Member level 5
Joined
Dec 26, 2010
Messages
84
Helped
15
Reputation
30
Reaction score
14
Trophy points
1,288
Location
Lahore Pakistan
Activity points
1,841
I required Mitsubishi PLC FX-3 U programming cable diagram.
I think it uses no components may be simple RS 232 communication.
but still required pin to pin connections.

thanks
 

I am not sure but i think connection and circuit is:
sc09.jpg
Melsec FX 8W Mini-DIN: 7:+TXD, 4:-TXD, 2:+RXD, 1:-RXD (TTL levels). Convert to/from RS232 with e.g. MAX202 (Mini-DIN pin 5 has +5V, pin 3 has 0V).

RS232 TXD -> PC serial connector pin 2 (=PC RXD), RS232 RXD -> PC serial connector pin 3 (=PC TXD), PC connector pin 5 = 0V.

Link PC connector pins 7 & 8 (CTS->RTS).
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top