+ Post New Thread
Results 1 to 7 of 7
  1. #1
    Junior Member level 1
    Points: 1,179, Level: 7
    rajkmr89's Avatar
    Join Date
    Jan 2011
    Location
    Chennai
    Posts
    15
    Helped
    0 / 0
    Points
    1,179
    Level
    7

    How to test the circuits!!!

    Hello friends,
    Can some body explain how can we test the self designed circuit is correct or wrong?

    For eg:if i have designed a circuit for some thing,i need to know whether the designed circuit will give the output or not.Can any one of the friends help me in this?
    waiting for your replies...
    With Regards,
    Raj...

    •   Alt8th November 2011, 17:03

      advertising

        
       

  2. #2
    Advanced Member level 4
    Points: 17,009, Level: 31
    kak111's Avatar
    Join Date
    Mar 2011
    Location
    Finland
    Posts
    1,366
    Helped
    941 / 941
    Points
    17,009
    Level
    31
    Blog Entries
    8

    Re: How to test the circuits!!!

    You can use circuit simulator software.

    List of Circuit design / analysis / simulation software
    Free Circuit Simulator-Circuit Design and Simulation Software List

    Top Ten:Circuit simulators
    Top Ten:Circuit simulators | Mixed-Signal Electronics

    Circuit simulation tools
    Software tool - Open Circuits
    ---> Hike with wise men , then you will be wise <---



    •   Alt8th November 2011, 18:20

      advertising

        
       

  3. #3
    Member level 5
    Points: 1,272, Level: 8

    Join Date
    Oct 2011
    Location
    Thodupuzha, India, India
    Posts
    89
    Helped
    19 / 19
    Points
    1,272
    Level
    8
    Blog Entries
    2

    Re: How to test the circuits!!!

    You can use the proteus software from labcenter electronics to simulate any electronic circuits. It is a cool tool at all!



    •   Alt8th November 2011, 18:27

      advertising

        
       

  4. #4
    Junior Member level 1
    Points: 1,179, Level: 7
    rajkmr89's Avatar
    Join Date
    Jan 2011
    Location
    Chennai
    Posts
    15
    Helped
    0 / 0
    Points
    1,179
    Level
    7

    Re: How to test the circuits!!!

    Thank you friends!!!! cool!!! And one more doubt dudes i have printed my circuit on PCB is it possible to check???

    With Regards,
    Raj...



  5. #5
    Full Member level 6
    Points: 3,600, Level: 14
    Achievements:
    7 years registered
    cks3976's Avatar
    Join Date
    Aug 2007
    Location
    India
    Posts
    346
    Helped
    84 / 84
    Points
    3,600
    Level
    14

    Re: How to test the circuits!!!

    Yes, but the Board-level Signal integrity tools are expensive... Example : PCB Electronic Circuit Simulation Software, Solutions & Tools | HyperLynx® - Mentor Graphics
    Hoping to be Helpful,
    CKS


    1 members found this post helpful.

  6. #6
    Advanced Member level 3
    Points: 7,552, Level: 20
    milind.a.kulkarni's Avatar
    Join Date
    Oct 2011
    Location
    Bangalore
    Posts
    923
    Helped
    213 / 213
    Points
    7,552
    Level
    20
    Blog Entries
    1

    Re: How to test the circuits!!!

    If it is board without component mount then you can have continuty detection of tracks using multi-meter and singal generator .....
    If it component assemebled board then follow standard board bring up testing procedure .....like measure resistance between power and GND ( Check short).....check for DNP and all etc... then power up the board and start bringuin up one by one interfaces .....

    Good Luck



    •   Alt9th November 2011, 13:10

      advertising

        
       

  7. #7
    Junior Member level 1
    Points: 1,179, Level: 7
    rajkmr89's Avatar
    Join Date
    Jan 2011
    Location
    Chennai
    Posts
    15
    Helped
    0 / 0
    Points
    1,179
    Level
    7

    Re: How to test the circuits!!!

    Thanks for ur valuable guidence friends!!! i'll try the best!!! And try to catch u up all with a +ve reply!!!
    Thank you very much friends...

    With Thanks & Regards,
    Raj...



--[[ ]]--