Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

bootloader for lpc-e2294

Status
Not open for further replies.
B

beacon88

Newbie level 4
Joined
May 3, 2010
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,310
hello,
I'm using Olimex LPC-E2294 revC.
I'm trying to access the board bootloader to install the Redboot bootloader, but I cannot connect the board to pc.
I have tried using serial port, JTAG and virtual serial usb. I also have connected the BSL jumper.
Whenever I try to connect, the PC cannot connect to the board.
I used Putty, but there is no response.
I used flashmagic and I got the error 'failed to autobaud'.
I used LPC flash utility but still got the connection error.

I tried using the ARM-Evaluator 7T and everything is fine and this means that the serial and USB cables are working.
Is there any solution?

Thank you.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top