Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Port Only solution in HFSS

Status
Not open for further replies.
D

DoYouLinux

Advanced Member level 4
Joined
Sep 26, 2007
Messages
113
Helped
3
Reputation
6
Reaction score
5
Trophy points
1,298
Activity points
2,152
Hi all,

I have some questions to ask you about Port Only solution in HFSS.

By setting this solution, the analysis is expected to be done at only one frequency (solution frequency, say 2.4 GHz), right.

However, as shown in the microstrip example of HFSS user's guide, there is a frequency sweep added to this Port Only solution (say 1 GHz to 5 GHz).

So, I am confused that is the analysis running from 1 GHz to 5 GHz also "Port Only" ???? If yes, what is the meaning of the solution frequency of 2.4 GHz ?

Thank you very much,

DYL
 

Solution Frequency is the only frequency in which a converged mesh is created. All other frequency solutions are determined by solving the same mesh as the solution frequency but with the field excitation of the frequency in the frequency sweep.

Have Fun
 
Hi tallface65,

Thank you very much for the wonderful explanation :) I understood now

DYL
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top