Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

USB flash disk based message board display

Status
Not open for further replies.
M

marky07

Newbie level 4
Joined
Sep 17, 2011
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,317
help plz.. from the site below that i have read. Is this USBWIZ with Philips LPC2141 microcontroller can be interface to the LED display for a message display?
**broken link removed**

im planning to design a message display board with a message or file from the USB flash disk...
is it difficult to send a file or message from the USB flash drive going to the microcontroller then it will be display to the LED board display??
 

Hi,

do you want a LED display or an LCD message display.

Anyways yes you can interface it, though you might have to modify a couple of output connections LED interface to 8051. The connections should be similar.

In supposition you want and LCD display which consumes much less power. e.g. HD44780 is a typical LCD.
**broken link removed** should get you started on building an LCD with a microcontroller.
 

How to program this USBWIZ with Philips LPC2141 microcontroller so that it can log or get a message or file from the USB flash disk going to the microcontroller?
 
Last edited:

There are plenty of prgrammer tools available e.g. silabs. You need to programme the mircocontroller to get the messages in C.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top