Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help: FAIL 003 - power supply Rohde & Schwarz NGSM 32/10

Status
Not open for further replies.
A

auato

Junior Member level 3
Joined
Sep 20, 2010
Messages
29
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,525
At a flea market I found an interesting jewel: a DC power supply Rohde & Schwarz NGSM 32/10 in very good aesthetic conditions. Unfortunately when it is turned on it seems to run well but after few seconds (sometimes immediately after power up) an error "fail 003" appears.

YouTube - ‪Filmato‬‏

Please, can you help me? I have not any manual...:cry:
 

Many problems have simple solutions. It may just be a bad connection or bad electrolytic capacitor. Remove the main plug and with caution of high voltage try to open the equipment and check for loose connections, for dry joints (use a good soldering iron to solder all suspected points) also for bad capacitors.
 

@mister_rf
Thank you for the tips. Next days I'll try to open the power supply to take a look inside. Meantime I hope that anyone has some datailed informations about error code and PS manuals/electric diagrams
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top