Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How supply bias to this LCD？

Status
Not open for further replies.
J

jigshaw

Member level 1
Joined
Jul 4, 2009
Messages
41
Helped
3
Reputation
6
Reaction score
3
Trophy points
1,288
Location
China
Activity points
1,520
Hello，friends

Recently I got a STN LCD from an old PDA (Sagem).Its product type number is G3246H-FE and there's no datasheet on the Internet.
So I used an oscilloscope to test waveshape on each pin and identifed the digital interface pins.
But its bias was different from STN LCD I ever met.I have used many LCD,every one with constant bias,but this one with changable bias as FR signal change.
Following picture is the bias signal I saw on the oscilloscope.
Can someone tell me how to give bias to this LCD?
Thanks a lot.


H3246H-FE bias Pin.GIF
 

what type of SAGEM ? perhaps you could get a user manual for it and identify the manufacturer of the LCD.
 

I know it was made by citizen.
I suppose it was a customized product.
I found datasheets for H3243,H3244,H3245, but there was no H3246FE, none of these has the same interface configuration with this one.
I was confused by its bias supply, different from common ones that have constant bias voltage.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top