Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

tca785 Phase Control IC from siemens

Status
Not open for further replies.
N

nxt_

Member level 4
Joined
Aug 16, 2010
Messages
69
Helped
4
Reputation
8
Reaction score
4
Trophy points
1,288
Location
Egypt
Activity points
1,834
Dear all,
Greetings, could any body check this ic and tell me how it works.. i made apcb same as the schematic in the attatchments but the 150 ohm series resistance with the triac gate is fried."i don't know why" the load is 220v, 40 watt lamp . i want to control it "dimmer" . the triac used is btb04-400a.

could anyone help please. thanks
 

Attachments

  • btb04400a.pdf
    441.3 KB · Views: 140
  • tca785.pdf
    454.7 KB · Views: 119
  • selected.bmp
    3 MB · Views: 143

Re: tca785 Phase Control IC from simens

For the 15V voltage pulses on output, using a 150 ohm resistor, we get a pulse current of 0.1A.
In this situation maximum pulsed power in the resistor = 1.5W. You need to consider using a minimum 1W resistor.

Using BTB04 series triacs, IGT = 10mA, you can to change the resistor value up to 1000 ohms, so a normal 0.25W resistor to be used for.
 
Last edited:
  • Like
Reactions: nxt_

    N

    nxt_

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top