Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

How to build a 0-50V voltage and 0-3A current controlling DC power supply circuit?

Status
Not open for further replies.

wolf12

Advanced Member level 4
Joined
Mar 31, 2011
Messages
109
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,298
Activity points
2,102
How to build a 0-50V voltage and 0-3A current controlling DC power supply circuit?
 

hi
can you be more specific like input range voltage and current and similarly you output requirements
 
hi
can you be more specific like input range voltage and current and similarly you output requirements

I can get 230V to 50V 3A transformer as the input, I dont know how you control current 0-3A

---------- Post added at 21:01 ---------- Previous post was at 20:59 ----------

Its a somewhat complex schematic!

Can you provide me a understandable schematic? Thanks.
 

just type ( 0-50V voltage and 0-3A current controlling DC power supply circuit ) in textbox Google then click here 0-50V 2A Bench power supply

I have built one of "electronic-lab" power supply circuit about a year ago, it didnt work. Give me some info on how to make one (want to control current 0-3A) , I might be able to design a circuit. Im a first year student, I admit I don't know much, but I can try. Thanks.
 

If you want to generate from 220V AC. First, please use a full-bridge and LC filter to rectify it to a croase DC. Then use a flyback AC-DC converter to generate 50V, 3A output.
 

i've made 30v power supply few years back i'll give you diagram you have to wait may be tomorrow i am outside my work station ok
 

Check out LM338.
Not going to get much simpler than that.
You will have to add more external stuff if you want to be able to set a current limit
below 5A , but that can come later.
Cheers
Rob
Sorry , didn't see the 50V rating.
Try a lm317HV with external pass transistor. Still pretty simple!!
 

Check out LM338.
Not going to get much simpler than that.
You will have to add more external stuff if you want to be able to set a current limit
below 5A , but that can come later.
Cheers
Rob
Sorry , didn't see the 50V rating.
Try a lm317HV with external pass transistor. Still pretty simple!!

I want to know how to control current.

---------- Post added at 00:17 ---------- Previous post was at 00:15 ----------

i've made 30v power supply few years back i'll give you diagram you have to wait may be tomorrow i am outside my work station ok

Ok upload it when you can. Thanks.
 

what types of converter are you talking about? DC-DC Converter or ACDC converter?
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top