Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Want help to Send sms to a PC using PIC

Status
Not open for further replies.
nicko-391

nicko-391

Member level 2
Joined
Dec 8, 2010
Messages
42
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
Sri Lanka
Activity points
1,542
Im new to GSM module. I want to know from where should i start? what are the easiest method? which GSm module should be used?

I have played more with PIC.
 

You want to interface the GSM module to a PC and communicate via a serial connection. Is this correct? Or do you mean PIC controller?
 
use SIM300 or any series..... play with gsm modem by connecting it to hyperterminal... download AT commands for the gsm module you are using and test it......
first do a search in the forum where it is explained many times...... you will get the testing steps of gsm modem and how to interface with pic along woth circuit and code.....
 
if you never worked with gsm modems then it will be difficult to do it with pic as you should understand how to use AT commands and how to get the response.... if you are aware of it then you can start of writing the program by seeing other threads...........
 

Can you recommend article,lesson or anything regarding this topic?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top