Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

delay cell using MOSFETS

Status
Not open for further replies.
C

cmos_ajay

Full Member level 2
Joined
Jan 30, 2007
Messages
126
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,296
Activity points
2,247
Hello, I need to make a delay cell giving about 100 us delay using mosfets. The cell needs to have a trigger input. Can someone give suggestions ? Thanks and regards.
 

Use large L and smalle W MOSFET to work as a resistor. And use Cgs of MOSFET as capacitor. RC will lead to delay.
 

If you´re working w/ ASIC design that amount of time seems very large and space needed will be very expensive to waste w/ that function.
Maybe is better you implement something based on counter solution.
 

Do a search for current starved inverters. It is quite a large time however. You might have to use an on- or off-chip capacitor.
 

Timered solutions based on silicon dopping characteristics are highly affected by temperature and thus result is imprecise.
Maybe could be not the better choice.
Think about a syncronous based solution.

+++
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top