Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[SOLVED] What is PIN strapping and why it is used?

Status
Not open for further replies.

snaku

Junior Member level 3
Joined
Oct 5, 2010
Messages
27
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,293
Location
Bangalore
Activity points
1,448
Hi All,
Where and when do we use pin strapping?

Thanks in Advance,
Naveen
 

To assign a default state of a pin on power on or reset time.
When do we use : If a logic value '0' or '1' is an active value of this pin, and you don't want to be activated it on power-on or reset,
you may strap it to a value that you need...
 
Hi Ilgaz,
Is PIN strapping and pulling up/pulling down a pin same?

thanks
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top