Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Externally control I/O pin

Status
Not open for further replies.
P

psrkiran

Newbie level 6
Joined
Feb 26, 2011
Messages
14
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,384
My project is SMS based device control in this i'm able to control devices through relays but when a person is at home he must be able to control the devices manually (through switch), when switch is turned off the state should be reflected to remote user (SMS sender)
Is this possible ??
 

Yes, You can use switches connected to microcontroller directly to control the devices.

On change of any output you have to send a sms to the remote user
 
nandhu015 said:
Yes, You can use switches connected to microcontroller directly to control the devices.

On change of any output you have to send a sms to the remote user
Click to expand...
Thanks for the reply

For the same pin can i connect both switch and the relay ?
if so please provide details
 

As i told earlier you have to connect the switches to microcontroller free pins, and not to the output pins or relay
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top