Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Use the PCM2904 or PCM2902 Burr Brown codec from TI.
This is a USB audio device with stereo mic input and line level stereo audio output. It uses Winows drivers so you dont have to worry about writing WDM.
Incorporates USB Audio Controller
• USB Serial Interface Engine
• Audio Class Encoder/Decoder
• 2 Endpoints (FIFO)
• USB transceiver
16 bit A/D Converter
• 1 channel
• Mute/Volume Control
• AGC pin for external control
On-chip PLL
• 5 Sampling Frequencies support 8kHz, 11.025kHz, 22.05kHz, 44.1kHz, 48kHz
Programmable Gain Amplifier: +20dB to ｬ58dB
Single Power Supply, Low Power: +3.3Volts±10%
Package: 24-pin VSOP
Each device which is compatible to that spec will be recognized
by Win and Macs as USB micro. The spec contains example descriptors
for a simple usb mic.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
