Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Help: Wavetek Acterna 3SR Stealth fixing

Status
Not open for further replies.
A

auato

Junior Member level 3
Joined
Sep 20, 2010
Messages
29
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,525
Hi to all.
I have a beautiful Wavetek Stealth 3SR perfectly working but it turns on only by an AC power supply. If I try to connect 12V of its battery pack or another external 12V DC power source at + and - terminals, the 3SR does not power-on. I take a look inside and I've noticed one burnt area near a relay. Here some photos:

**broken link removed**

**broken link removed**

**broken link removed**


I have not any schematic or service manual and I don't know which electronic components must to be replaced.

Please, can you help me by yours photos or electric diagram or service manual to restore my 3SR?

I believe that this model is equivalent to the JDSU SDA-5000.

bye
auato
 
Last edited:

Hello

I have a Wavetek 3SR in perfect condition. Disassembled in a few days and I put some pictures of the burned area.

You can see some pictures in this direction
**broken link removed**

**broken link removed**

**broken link removed**

**broken link removed**

**broken link removed**


Greetings

COSMOS2K
 
Last edited:

Woow COSMOS2K! Thanks a lot! It seems I've two SMT resistors and the transistor on the left side burnt. Could you try to read the values?

Thank you very much!
 

Hello

In a few days take pictures with more resolution in the affected area

COSMOS

---------- Post added 31-03-11 at 01:27 ---------- Previous post was 30-03-11 at 23:53 ----------

Hello

I hope these pictures help you repair your 3SR, if you encounter problems send me a message.

**broken link removed**

**broken link removed**

**broken link removed**

Greetings

COSMOS
 

Great, COSMOS2K! And thank you for your interest!
I belive that something fault happened about realy circuitry. Tomorrow I want look better the impacted area and impacted components.
What's the function of that realy?
Someone have a service manual or circuit diagram, please?

COSMOS2K said:
Hello

In a few days take pictures with more resolution in the affected area

COSMOS
Click to expand...
 

I want to thank the COSMOS's precious and essential aid! His photos help me to restore and to fix my Wavetek 3SR. Now, it works well by both external power supplies: AC adapter and battery pack.

Thank you very much!
Auato

**broken link removed**​
 
Last edited:

Hello Auato:

I am happy that you've fixed the problem and that my images have been useful in the repair.
I have no schematic of 3SR not the service manual.
If you find them would be grateful if you share with me.

Greetings

COSMOS
 
  • Like
Reactions: auato

    A

    auato

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top