Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

no markings on resistor

Status
Not open for further replies.
S

showsbot

Newbie level 1
Joined
Mar 27, 2011
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,286
im trying to replace a resistor on a digital clock in my car it is brown in colour and has 18ohm(symbol).j on it i was told it is 2 watt, it is 15mm long approx and about 4mm radius. can any one give me some advice please.
 

From what you describe its an 18 Ohm, 2Watt resistor ! The size is a bit small for 2W, it is more likely a 1W or 1.5W rating but it depends on its internal construction.
You should find a replacement very easily, its a standard part you can get from most electronic suppliers.

Brian.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top