Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
your logo and images must be in .DXF (drawing interchangeable format) if have it means
file----> import---> dxf and then DXF IN window open and then----> location file , and fill logo class
and then select increment selection,default text table
NOTE : DXF file and board file dimension must be in same (like mm or mils )
View attachment error.txt
hello kapil,
I also did like this so many times but i'm getting the error here i attached an error file please find that and please kindly send me the solution i'm waiting for your replay,I'm trying its from past 3 weeks plz replay me
isuue is with your DXF. Splines are not supported by Allegro. Issue is raising because you created the DXF directly from your 3D software ( solid works, proE etc).
Try the following
1. Open the DXF in Visual cad ( inastallation folder/cadence/spb xx.x/tools/layout_plus/vcad)
2.edit --> select all
3.symbol --> explode symbol
4.modify --> explode
5.then save as DXF in some other names.
6. import the new DXF to allegro.
cheers,
Nikhil
Hello nikhil
Thanks for response,here i'm sending my dxf file and image i required on pcb the original image is converted to dxf using img2cad software
I think your DXF donot contain any valid data ( file size is only 9 kb). here I attached screen shot when I opened DXF given by you in a DXF viewer .How ever I followed the steps I mentioned earlier and successfully imported it to allegro. Herer I am attaching the new DXF. You can import to your allegro using the normal procedure ( file--> import--> DXF)
hello nikhil,
Thanks for responding, I am also succesfully imported the dxf into allegro can u plz tell me frist how to convert images or logos into dxf.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
[/URL]