Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[SOLVED] Any SINGLE WIRE (TxD only) bootloader for PIC16F877A ?

Status
Not open for further replies.

vinodstanur

Advanced Member level 3
Joined
Oct 31, 2009
Messages
751
Helped
114
Reputation
234
Reaction score
114
Trophy points
1,333
Location
Kerala (INDIA)
Activity points
7,054
Is there any single wire bootloader available? At present i don't have a MAX232 chip with me...So i made a transistor inverter to receive serial data from RS232.
Then i downloaded some bootloader by google search. But they need Tx of PIC to be connected.
So, I THINK NOW I HAVE TWO OPTIONS,
1> A bootloader which works using one wire (TxD and GND of RS232)
or
2>Any other circuit for logic level matching for sending data from PIC (Tx) to RS232 (RxD)

Could any one help me?:sad:
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top