Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Cadence, ibis model, spice and simulation

Status
Not open for further replies.
L

lassdou

Newbie level 1
Joined
Feb 16, 2011
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,290
Hello,

I have a question that might be unclear as I am not well informed nor at ease with the whole IBIS/Models/SPICE subject.

I would like to know it is possible to use IBIS models (of electronic boards) to make some kind of a functionnal simulation, using CADENCE software, or do I have to somehow convert it into SPICE model => in that case, is it possible?

I hope that was clear, if not please help to understand this topic better so that I can clarify my questions.

Thanks in advance.
 

Hello,

Yes, Cadence can directly read Ibis files. However, depending of the features of the Ibis file, you might be to translate it into the proper format prior to use in your particular simulation engine in Cadence. For instance, if your Ibis file pertains to a line-receiver buffer, the translation is probably necessary. Might need to use the "Ibis2subckt" command to translate your file.

Regards,
 

cadence can read only older versions of ibis models
 

b00merang said:
Hello,

Yes, Cadence can directly read Ibis files. However, depending of the features of the Ibis file, you might be to translate it into the proper format prior to use in your particular simulation engine in Cadence. For instance, if your Ibis file pertains to a line-receiver buffer, the translation is probably necessary. Might need to use the "Ibis2subckt" command to translate your file.

Regards,
Click to expand...


Hello,

H\I have an ibis file created by Xilinx ISE and I would like to imulate it in Cadence Spectre. Can you help me how to do it, please??

Thanks and Regards,
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top