Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

MOS model files for PSPICE

Status
Not open for further replies.
sp3

sp3

Member level 5
Joined
Jan 1, 2008
Messages
82
Helped
13
Reputation
26
Reaction score
10
Trophy points
1,288
Activity points
1,848
Dear all,

Where I can find the MOS model files for PSPICE simulations.? The MOSIS provides HSPICE compatible MOS model files only. If you have any information on MOS model files for PSPICE then please share it.

Thanks in advance,
suppi
 

Pspice & Hspice are very similar. You should be able to use the models. You may need to do the odd bit of model editing.

Keith.
 

keith1200rs said:
Pspice & Hspice are very similar. You should be able to use the models. You may need to do the odd bit of model editing.

Keith.
Click to expand...

What i understood from websites is that HSPICE levels are 50+ and PSICE can be at max 7. Somehow i manged to get one model file (90nm technology). When I used it PSPICE it flashed some errors mainly for
levels,
VTH0,
LPE0.

Is there any software/executable which converts HSPICE model file to PSPICE compatible model file ??

Thanks,
suppi
 

You could have a look here: FAQ: MOSIS Spice Model Parameters

You can often get things working simply by changing the "level=xx" statement to whatever is required by Pspice. I cannot remember what the BSIM3 level is for Pspice, but it should be in your documentation. I frequently have to edit "level" statements.

Keith.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top