Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

How to load data from flash to address initialized in SRAM?

Status
Not open for further replies.
P

pimr

Member level 4
Joined
May 19, 2004
Messages
78
Helped
8
Reputation
16
Reaction score
3
Trophy points
1,288
Location
India
Activity points
736
design of board with dsp

hi,
i need to design a board containing 1MB SRAM, 1MB of flash(for program) and 1MB of EEPROM(for data) together with adsp-bf531,I am planning to initialize data and program address in SRAM at the time of booting.My problem is how to load data from flash and EEPROM to the addresses initialized in SRAM, do i have to do it with the help of processor or is there any other way out?
thanks
pimr
 

design of board with dsp

oh, i know two methods! one is you can use ram file system, second you can use the flash file system
the main factor is that you must program the app into the flash with the programmer, put the os and app toghter!
 

Re: design of board with dsp

hi,
the problem is that there is no os! also how would the data be loaded from flash to RAM?
thanx
pimr
 

design of board with dsp

can you tell me which flash do you use?
you can put all the applications in the bootrom, when the board starts, the cpu will jump to the position who has his special property, hehe:)
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top