Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

design passive delay line

Status
Not open for further replies.
F

Ferdy88

Junior Member level 1
Joined
Dec 26, 2010
Messages
16
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Roma, Italy
Activity points
1,402
Hi,
I need to design a passive delay line LC with constant delay of 2 ns the frequency f = 2.14 GHz. I found solutions low-pass but obtained a great line (about 20 sections LC).
I'm interested in a solution contained in size also pass band around my frequency.
 

a bandpass filter can do that in 1 section. I would start off with a 1 pole bandpass of around 500 mhz bandwidth.
 

thanks biff44,
you can give more information as to do, about the filter I know very little.
I give me more information and tell me where I can find these things.............
 

Are you talking about a lumped element or distributed circuit on a board, or an IC design?
 

Re: passive delay line

Ferdy88 said:
... a passive delay line .. with constant delay of 2 ns
Click to expand...
What about a ≈40cm long piece of coaxial cable?
An RG-58 cable has an impedance of about 50Ω. RG-59: 75Ω.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top