Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

USB power injector circuit based on LM2575

Status
Not open for further replies.

Fragrance

Advanced Member level 4
Joined
Jul 26, 2002
Messages
1,190
Helped
248
Reputation
496
Reaction score
202
Trophy points
1,343
Location
East Of Earth
Activity points
8,933
hi all friends

You have seen lot of USB power injector one from silicon chip magazine which was republish in EPE magazine some other on web when you Google.
This hardware was develop for my own need and it is better and has lot of edge on those design, switch mode capable to deliver current truly 1 amps (tested my self) out put is hundred percent off if no input USB connector connected

It is useful handy tool;usually a Laptop cna give maximum 250ma power on USB port, so you can use it with USB power based programmers, USB power hard drive and lot more application
 

Attachments

  • USB POWER INJECTOR.rar
    332.5 KB · Views: 152

I'm currently using an RTL8187L USB WIFI adapted connected to a dell gx280 with a 5m extension,
I was thinking for a while to use external psu for that device, i may even get better transmit power,
i can place it in the end of the extension close to the wifi to avoid any voltage drop.

Thank you
Alex
 

I'm currently using an RTL8187L USB WIFI adapted connected to a dell gx280 with a 5m extension,
I was thinking for a while to use external psu for that device, i may even get better transmit power,
i can place it in the end of the extension close to the wifi to avoid any voltage drop.

Thank you
Alex

yes you can use it
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top